EROAD Clarity Edge - Pre-Install Instructions; Cable Running

Clarity Edge Install Guide
5
1.
2.
•
•
Pre-install instructions
Park the vehicle on HORIZONTAL ground and shut down the engine.
Download the ezInstaller App from the App Store or Google Play.
Cable Running
Tuck all cabling out of sight along the windshield, and/or behind the roof and A-Pillar trim.
Extra cable is tidied securely behind the dash.
Extra Fatigue camera cable should be tidied securely behind the roof trim, close to the Clarity Edge
camera.
EROAD recommends following standard OEM cable routing practices. Cable tie the Edge cable at regular
intervals.
Deviations from these instructions may result in a re-installation callout at the Installer’s
expense.
Following this guide means the mounting location will comply with local regulations.

In some vehicles (eg. late model Scanias) there is a cable-tidy shroud for use within the
passenger-side A-Pillar.
