EasyManua.ls Logo

ERT SpiroSphere - Page 126

ERT SpiroSphere
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SpiroSphere
®
ECG Instructions for Use
Page 126/136
Version 02.02 • 04AUG2022
Test Speci¿cations for Immunity to RF Wireless Communications Equipment
Test
frequency
(MHz)
Band
a)
(MHz)
Service
a)
Modulation
b)
Maximum
power
(W)
Distance
(m)
Immunity
test level
(V/m)
385 380 - 390 TETRA 400 Pulse
modulation
b)
18 Hz
1.8 0.3 27
450 430 - 470 GMRS 460;
FRS 460
FM
c)
± 5 kHz
deviation
1 kHz sine
20.328
710 704 - 787 LTE Band 13,
17
Pulse
modulation
b)
217 Hz
0.2 0.3 9
745
780
810 800 - 960 GSM 800/900;
TETRA 800;
iDEN 820;
CDMA 850; LTE
Band 5
Pulse
modulation
b)
18 Hz
20.328
870
930
1720 1700 -
1990
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band
1, 3, 4, 25;
UMTS
Pulse
modulation
b)
217 Hz
20.328
1845
1970
2450 2400 -
2570
Bluetooth;
WLAN
802.11 b/g/n;
RFID 2450; LTE
Band 7
Pulse
modulation
b)
217 Hz
20.328
5240 5100 -
5800
WLAN
802.11 a/n
Pulse
modulation
b)
217 Hz
0.2 0.3 9
5500
5785
NOTE: If necessary to achieve the immunity test level, the distance between the transmitting antenna
and the ECG unit may be reduced to 1 m. The 1 m test distance is permitted by IEC 61000-4-3.
a)
For some services, only the uplink frequencies are included.
b)
The carrier shall be modulated using a 50 % duty cycle square wave signal.
c)
As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it
does not represent actual modulation, it would be worst case.

Table of Contents

Related product manuals