SpiroSphere
®
ECG Instructions for Use
Page 17/136
Version 02.02 • 04AUG2022
3. Sensor Settings
Place the SpiroSphere Sensor in
the cradle, and tap on <Scan> to
scan for available sensors. Tap
on the sensor you want to pair
the SpiroSphere with and select
<Pair> from the dropdown menu.
Conrm with <Next>.
(Refer to chapter "Settings &
Tools >Spirometry Settings -
Sensor")
4. Ethernet Settings
Choose the appropriate settings
and conrm with <Next>. (Refer
to chapter "Communication".)
5. WiFi Settings
Choose the appropriate settings
and conrm with <Next>. (Refer
to chapter "Communication".)
Note that pairing is only possible for 90 seconds after the SpiroSphere Sensor is
placed in the cradle.
To Next Page
Loading...
