SpiroSphere
®
ECG Instructions for Use
Page 70/136
Version 02.02 • 04AUG2022
Pacemaker
Quality issue
Scaling and Filter
Gain: 5mm/mV, 10mm/mV
Speed: 25mm/sec, 50mm/sec
Filter: No Filter, Line Filter,
Muscle Filter, All Filter
You can adjust the view of the online recording by changing the settings for Gain and Speed. You
can also apply lters to the view.
Note: The on-screen scaling has been adapted to t the aspect ratio of the display. It should not be
used for direct on-screen measurement (e.g. using a ruler).
It is possible to print with:
Gain: 10mm/mV or 5mm/mV
Speed: 25mm/s or 50mm/s
(depending on the congured
on-screen display).
To Next Page
Loading...
