f+
Error:
When any of the (Scores, Team Fouls, Time Outs or Period) buttons
are pressed in error, press ‘ERROR -1' button to subtract from the
previously added to value.
Reset:
Only accessible with the timer stopped (HOLD).
Team Fouls: Press ‘RESET FOULS T/OUTS’ button once to reset.
Time Outs: Press ‘RESET FOULS T/OUT’ button again.
New Game: Press ‘RESET NEW GAME’ button. This will reset the
timer, timeouts, team fouls and scores.
Period:
Press the ‘+1 P’ button to add 1 to the period value.
Indicator (Subs):
Turns ON/OFF the general purpose indicator (sub’s or injury, pass etc.).
Possession:
Pressing a possession indicator button will turn
on the bench possession arrow and display on
the LCD.
Pressing the opposite side button will reverse the possession indicator.
Pressing the same button twice will turn the indicator OFF.
Press f + to change the direction of the scoreboard possession
arrow indicator panel. This will allow the score bench panel to match up
in the event the scoreboard is behind or in front of the score bench.
Score Board Operation
Reset, Period, Error, Indicator, Possession, Siren
POSSESSION
T/OSUBF
Score bench indicators
10 2 2 12:30
12 3 1
Siren:
Press the button to activate the siren. The siren will sound while the button is held.
The sound of the siren is programmable (refer to page 18 - Sirens).
To manually sound the “End Of Game” siren press f +
part of the game
esa.com.au 8
To Next Page
Loading...
Need help?
General