4
2
. Pupil
3
. [Save]
Press [Save] button to store the image into memory
4
. [Cancel]
Press [Cancel] button not to store the image
1. Result of refractometry
Maximum of ten images can be stored for each eye. Each image will have a sub number (01~10).
Displaying of stored image.
Press [Disp] button in observation display. Images stored in memory will be displayed.
[Menu Display]
1. Images of eye.
2
. Serial number – Sub number.
3
. Time of the selected image.
4
. End of the DISPLAY mode.
5
. RIGHT/LEFT SIDE eye mode.
6
. Change images of eye.
When you press the image button, selecting image will be displayed.
USER MANUAL > OTHER MODES
39 AKR300 - Auto Kerato Refractometer > V3 - 04-2020
To Next Page
Loading...
