ETAtouch controller [Boiler] function block – log boiler
temperature for measurement. By pressing the [Start
now] button, the boiler will immediately begin
preparations for a subsequent measurement.
Fig. 7-45: Settings window for emission measurement
In addition, the locking time of the boiler can be
adjusted in the settings window ( [Lock duration]
button). This relates to the set time of the measure-
ment. Within this period, a message appears that the
boiler is not to be heated up, so that the heating system
has time to cool.
The [Deactivate measurement] button ends the
emission measurement and switches the boiler back to
normal mode.
To Next Page
Loading...
