Need More Relays?
If the three on board relays on the RMS-200 board are not enough for your needs, you
can add five additional relays by adding a USB relay board.
The USB Relay Board gives you control of 5 SPDT relays for general purpose use via the
standard USB Bus. See the USB Relay Board user manual for additional information on
how to hook up the USB Relay Board to your RMS-100, RMS-200 or RMS-300 unit.
To access the Relay Daughter Board interface, go to the Device Manager and click on
the USB Relay Board Icon shown below.
To Next Page
Loading...