Downloads
Please visit http://www.remotemonitoringsystems.ca/rms200/downloads.php for current
downloads such as SNMP mib file.
Specs
Base System 256Mb Flash / 64Mb Ram
150ma @ 12.2v = 1.830 Watts
Relay power consumption:
relay1 add 42ma
relay2 add 42ma
relay3 add 42ma
relay4 add 91ma
Relay Total for all relays energized: 217ma @ 12.2v = 2.647 Watts
Bare Board = 150ma + 217ma for all relays = 367ma.
367ma @ 12.2v = 4.477 Watts. For board and all relays energized.
General Board Information
Software Features Hardware Features
Linux: Kernel 2.6.33
Services:
HTTP Server,
FTP server,
SSH,
SNMP Agent,
TELNET Server
PPP
Drivers:
USB to Ethernet
USB to Serial
USB flash stick
USB Web Cameras
Relays
LM75
More...
SDK:
Open source SDK for Linux
Systems
Language: C, PHP, Python
Size:
Weight:
7.750 x 4.625 inches.
220 grams (7.76 oz.)
MIPS 500 Million Instructions /sec.
Power
150 ma @ 12.2 vdc
**(with all relays off and no USB
devices plugged in)
Cpu
Arm AT91SAM9G20
32 bit, RISC, 400MHz
Memory
64MB of SD-RAM
256MB of FLASH
Ports
1 Ethernet (10/100 Mb/s)
2 USB 2.0
Others
1 Serial console, 1 full RS-232,
I/O lines, Single power source
twin onboard power supplies
(5 Volt 2A and 3.3 Volt 2A)
To Next Page
Loading...