Using
Your
RoboVac
Important Tips Before Use
X
e
0
6
X X
e 8
G
0
(:)
Remove power cords and small objects from the floor
that
may entangle RoboVac.
You
can
use
the supplied cable ties
to
organize your wires and power cords.
@)
Fold
tasseled edges of
area
rugs underneath
to
prevent tangling RoboVac. Avoid
cleaning very dark-colored high-pile rugs or rugs thicker than 1.02
in/26
mm
as
they may cause RoboVac
to
malfunction.
8
Keep
RoboVac away from spaces lower than 2.87
in/73
mm
to
prevent RoboVac
from getting stuck. If necessary, place a physical barrier
to
block off the problem
areas.
Q
Keep
RoboVac away from wet areas.
8 RoboVac may climb
on
top of objects less than 0.63
in/16
mm
in
height. Remove
these objects
if
possible.
0 Anti-drop sensors will prevent RoboVac from tumbling down stairs
and
steep drops
in
most
cases.
Sensors
are
less
effective if dirty or
used
on
carpeted/reflective/very
dark-colored floors. It
is
recommended to place physical barriers to block off areas
where RoboVac may fall.
~-------------------------------------------------------------------------------------------------------
..
l
_'J,,r_
Place
physical barriers
in
front of fireplaces and areas that may cause damage
to
l
: Y RoboVac if entered. :
. .
.........................................................................................................
19
To Next Page
Loading...
