EUFY RoboVac - Clean the Swivel Wheel

.••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••.
l -'fJ- • Be careful not to make the path tracking sensor dirty by touching it with l
: , your hands. :
: • Do not clean the path tracking sensor with sharp-pointed objects,
as it :
. .
: may damage the sensor. :
. .
..........................................................................................................
Clean the Swivel Wheel
Hair or dust particles can easily get entangled in the swivel wheel. Be sure to clean the
swivel wheel periodically and
as needed.
Wheel -----
Axle
0 Remove the swivel wheel.
f) Clean any hair or debris wrapped around the wheel or entangled inside the wheel
cavity.
E) Reinstall the wheel and push in until it clicks into place .
..........................................................................................................
: 'I , :
l -,- • Do not clean the swivel wheel with water. l
·. ':' :
..........................................................................................................
33