Wi-Fi
Status
Light
~
Slowly flashing blue Waiting for connection
Rapidly flashing blue Connecting with your wireless router
~
Solid blue Connected with your wireless router
.••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••.
. .
:.
,
1
, • If you have any problems during the Wi-Fi setup process, refer
to
the
:.
j
-,-
"Troubleshooting> Wi-Fi connection" section
in
this Manual. j
. .
j If RoboVac gets stuck
in
any space, tap
Find
My
Robot
in
the app
to
find j
: the machine. :
. .
..........................................................................................................
Restore
Factory
Settings
Press
and hold
►
II
on
RoboVac for 10 seconds to restore factory settings if necessary.
-
You
will hear a voice prompt when the settings have been reset and the Wi-Fi
status light will slowly flash blue.
Now
you can follow the Wi-Fi instructions in the
EufyHome app to set up the Wi-Fi connection.
Schedule
Cleaning
With
the EufyHome app, you
can
schedule RoboVac
to
start cleaning at a particular
time.
·••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
.
j
_"'a(_
•
You
can set the
time
and customize the cleaning schedules from Sunday
: y
to
Saturday
on
the EufyHome app. This function
is
available
in
the app
.
.
.
.
j - only.
.
. .
..........................................................................................................
Start I Pause Cleaning
...
··.
j
I!!!!!!!
• Make sure the main power switch at the side of RoboVac
is
turned
on
j
j
liiiiiila
before
use
. :
~
•
You
can also start or pause cleaning
via
the EufyHome app. .
.............................................................................................................................
♦
24
To Next Page
Loading...
