EUFY RoboVac - Specifications

Wi-Fi Status
I Cause
I Solutions
Light'=.:-
RoboVac has connected
• Check
if your router is connected to the
Internet.
Solid blue
to your router, but
• Check with your Internet provider to
cannot access the
Internet.
see if there is any Internet connection
problem.
• Check if you have modified your network
RoboVac cannot
name and password.
Rapidly
connect to your
•
Reset Wi-Fi connection if necessary.
flashing blue
wireless router.
Refer to the "Use Your RoboVac with
the EufyHome App > Restore Factory
Settings" section in this manual.
•
Set up Wi-Fi connection with RoboVac.
Refer to the "Use Your RoboVac with
Wi-Fi connection is
the EufyHome App" section in this
Slowly
manual.
reset or
has not been
flashing blue
set up before.
•
Reset Wi-Fi connection if necessary.
Refer to the "Use Your RoboVac with
the EufyHome App > Restore Factory
Settings" section in this manual.
• RoboVac
is turned off.
• RoboVac's power • Charge RoboVac by attaching
it to the
Off level is low. Charging Base . Make sure the main
• RoboVac
is in Sleep
power switch is turned on .
mode.
Specifications
Input 19 V == 0.6 A
Battery Voltage
14.4 V
==
Power Consumption 40W
Q
Battery Type
14.4 V
==
Li-ion 2600 mAh
~
~
Dust Collector Capacity 600ml
Cleaning Time Max. 100 mins
Charging Time
300 - 360 mins
I
~~ ~ln_put -------+--19 v_---_0 . 6_A ----------<
. ~ . Output 19V==0.6A
39