Select
a
Suction
Power
Level
In
the EufyHome app, select a suction power level according
to
your needs:
• Standard (Default)
• Turbo
•
Max
•
BoostlQ™
.••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••.
I
-t-
•
When
RoboVac starts cleaning the next time,
it
will clean according
to
!
: , the suction power level you previously selected. :
. .
..........................................................................................................
Select
BoostlQ™
feature
In
the EufyHome app, select the BoostlQ™ feature according
to
your needs.
While
cleaning at standard suction power level, RoboVac will automatically increase the
suction power if
it
detects
that
stronger power
is
needed
to
ensure the best clean.
BoostlQ™
is
ideal for cleaning thicker carpets and hard-to-sweep messes, which will
reduce the total cleaning time, but increase the noise level. If the vacuuming noise
caused by BoostlQ™ disturbs you, you can disable this feature.
Use
Your
RoboVac
with
Amazon
Alexa/
the
Google
Assistant
Amazon Alexa or the Google Assistant
is
a smart voice control device
that
enables
you
to
control RoboVac
with
your voice.
Currently this feature only supports English, German, French, and Spanish.
You
could check regularly
if
more languages
are
supported at
https://www
.eufylife.
com/
support/.
Before
you
start,
make
sure
that:
• RoboVac
is
attached
to
the Charging
Base
to
ensure there
is
enough power.
• RoboVac
is
connected with the EufyHome app.
•
You
have
an
Amazon Alexa-enabled device (i.e. Amazon
Echo,
Echo
Dot and
Amazon
Tap,
Echo
Show,
Echo
Spot) or a device enabled with the Google Assistant
(i.e. Google Home, Google Home
Mini)
. These devices
are
sold separately.
• The Amazon Alexa app or Google Home app
is
already installed
on
your smart
device, and you have created
an
account.
To
control
RoboVac
with
Amazon
Alexa
or
the
Google
Assistant
1.
Open the EufyHome app and find "Smart integrations" in the top left.
2. Follow the on-screen instructions
to
complete the setup.
27
To Next Page
Loading...
