EasyManua.ls Logo

EUFY RoboVac - Voice Alert

EUFY RoboVac
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Voice
Alert
When
an
error or issue occurs, the
red
indicator
on
RoboVac will flash and you will
hear a specific voice prompt. Follow the voice prompt to solve the problem.
Voice
Prompt
Cause
and
Solution
Front bumper
is
stuck.
Tap
it
repeatedly
to
remove any
Error
1:
Front bumper stuck
dust;
if not, then move the device
to
a new position and
try
again.
Error 2: Wheel stuck. Check
Wheel may
be
stuck or trapped. Clear any obstacles
the wheel and move it
to
a
in
the surrounding
area
and check the wheel for any
new position
trapped dust. Move the device to a new position and
try again.
Error 4: Rolling brush stuck. Remove the rolling brush, roller joint, roller brush cover,
Remove and clean the and suction inlet
to
clean it. Once cleaned, place the
rolling brush items back into the device and
try
again.
Error 5: Device trapped.
Device
is
trapped. Clear any obstacles
in
the
Clear the surrounding
area
surrounding
area
and try again.
Error 6: Device trapped. Device may
be
suspended
in
air. Move it to a new
Place
device near the position close
to
the original position and
try
again. If
position where the problem the device
is
still unable
to
start, clean the edge sensor
occurred.
and try again.
Error 7: Wheel suspended.
Wheels may
be
suspended in air. Move the device to
Please
move the device to a
a flat surface and a new position close
to
the original
new position position then try again.
Error 8: Low battery,
Low Battery; system will shut down. Charge the device
shutting down device.
and try again.
Please
charge your device
Error
21:
Charging
Base
Charging base
is
blocked by obstacles, clear any
blocked
by
surrounding
obstacles around the charging base and
try
again.
obstacles
- Open the battery compartment and check whether
the battery
is
connected and restart the device
Error
S1
: Battery Error. Refer - Battery Temperature may
be
too high or low; wait
to
Owner's Manual or App until the battery falls
to
normal temperatures before
for help
usage
(0
° ~
40
°
C/C
32 ° F
to
104
°
F)
- If the issue persists, contact customer support for
help
36

Other manuals for EUFY RoboVac

Related product manuals