Important Tips
When
using for the first time, follow RoboVac to observe and resolve any problems that may occur.
X X X
G
X
0 0
8 Remove power cords and small objects from the floor that may entangle RoboVac.
You
can use
the supplied cable ties
to
organize your wires and power cords.
G) Fold tasseled edges
of
area rugs underneath to prevent tangling RoboVac. Avoid cleaning very
dark-colored high-pile rugs or rugs thicker than 1.02in /
26mm
as they may cause RoboVac to
malfunction.
8 It
is
strongly recommended
to
place boundary strips in front
of
fireplaces and certain areas (i.e.
air vents) that may cause damage to RoboVac
if
entered.
(D Keep RoboVac away from
wet
areas during cleaning.
0 RoboVac may climb on
top
of
objects less than 0.63in / 16mm in height. Remove these objects
if
possible.
0 Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep drops in most
cases. Sensors
are
less
effective
if
dirty or used on carpeted/reflective/very dark-colored floors.
It
is
recommended to apply the Boundary Strip(s) to block
off
areas where RoboVac may fall.
€)
To
keep RoboVac away from any area
or
item you do
not
want RoboVac to clean, apply the
Boundary Strip(s) on the floor
with
adhesive tape
to
create a virtual barrier. Make sure the
strips are placed
FLAT
on the floor.
ll
Q
~
6
t
51005002509
V01
03
To Next Page
Loading...
