AUDIO | VIDEO MEDIA CONTROLLERS
EuCon APPLICATION SETUP GUIDE
SOUNDTRACK PRO
13
Section 4: Soundtrack Pro
Configuring Soundtrack Pro to operate with the Artist media controllers is simple.
1. In Soundtrack Pro, choose Soundtrack Pro->Preferences.
2. Click the Control Surfaces tab.
The Control Surfaces dialog opens.
Figure 4-1 Control Surfaces dialog
3. Select Euphonix from the Use drop-down menu.
You will see a Euphonix logo with the message in Figure 4-1.
4. Close the Control Surfaces dialog.
The Artist media controllers connect and update automatically.
Your Artist media controller should now be controlling your application. If not,
make sure Soundtrack Pro is the front-most application (i.e., the one receiving
keystrokes and mouse clicks). The Artist media controllers control only the
front-most application.