AUDIO | VIDEO MEDIA CONTROLLERS
EuCon APPLICATION SETUP GUIDE
CUBASE
24
4. Select EuCon from the drop-down list.
The EuCon device is added, the control surface immediately updates, the
faders and knobs display track functions, and the EuCon Device Setup dialog
appears (Figure 6-1).
6.1 EuCon Device Setup
This section discusses the EuCon Device Setup dialog which allows editing track
assignment and transport control parameters. If the EuCon Device setup dialog is
not open: From Cubase choose Devices->Device Setup, then select EuCon from
the Remote Devices folder in the Devices section.
Figure 6-1 EuCon Device Setup
To Next Page
Loading...
