AUDIO | VIDEO MEDIA CONTROLLERS
EuCon APPLICATION SETUP GUIDE
DIGITAL PERFORMER
29
Section 7: Digital Performer
NOTE: Digital Performer version 6.01 or higher is required. Download the latest version
of Digital Performer from MOTU’s web site. Digital Performer must be installed
prior to installing EuControl.
For Digital Performer to communicate with Artist media controllers, the EuCon
driver must be added in the Control Surface dialog.
1. Open Digital Performer.
2. Choose Setup->Control Surface Setup.
The Control Surface dialog opens.
Figure 7-1 Control Surface dialog
3. Click the + button (add) on the right.
A pull-down list with Drivers appears with EuCon at the top.
To Next Page
Loading...
Need help?
General
