AUDIO | VIDEO MEDIA CONTROLLERS
EuCon APPLICATION SETUP GUIDE
NUENDO
22
MC Mix
1. Select an instrument track.
2. Press and hold the INSERTS knobset selector until it blinks, then release.
Parameters for the instrument on the selected track are displayed and can be
adjusted with the encoders.
5.3.4 MIX and GROUP Knobsets
The MIX and GROUP knobsets now access Nuendo 5’s Direct Routing features.
1. Select a track.
2. Press the MIX knobset selector.
Selected routing is displayed in the top-left knobcell.
The SEL key toggles between summing mode and intercancel.
The ON button enables the routing destination.
3. Press the top-left knobtop to display routing selections.
4. Press a knobtop to select the desired destination.
To Next Page
Loading...
Need help?
General
