Euphonix MC Control Artist Series User Manual

AUDIO | VIDEO MEDIA CONTROLLERS
EuCon APPLICATION SETUP GUIDE
CUBASE
28
6.2.4 Wheel Edit Modes (MC Control)
Using the Jog Wheel instead of the mouse is a faster way to trim head and tail of
a region, fade a region in and out, and adjust gain.
1. Select a track on the Artist media controller.
2. Select an audio region on the track.
3. Zoom in to the region using the Jog Wheel.
4. Page down twice on the Softkeys.
5. Select Fade In.
6. Use the Jog Wheel to select the fade in region.
7. Repeat using gain, fade out, move.
6.2.5 Create and Control Surround Panner
Using knobs and faders without looking at the screen to control the balance of
your surround mix allows you to remain more engaged with your mix.
1. Create a 5.1-channel bus in the project.
2. Press the MIX knobset selector (MC Mix) or MIX Knob Top (MC Control).
3. Select 5.1.
4. Press the BACK key to exit.
5. Press the Pan knobset selector (MC Mix) or Pan Knob Top (MC Control).
You can now control the surround panning.
6. Press the BACK key to exit

Euphonix MC Control Artist Series Specifications

General

Brand	Euphonix
Model	MC Control Artist Series
Category	Recording Equipment
Language	English