EasyManua.ls Logo

Eurotech Apollo - PhoenixBIOS Configuration; BIOS Features and Navigation

Eurotech Apollo
145 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PhoenixBIOS features and setup
Issue G 51
PhoenixBIOS features and setup
The APOLLO is supplied with an embedded BIOS from Phoenix. The BIOS provides the
following features :
Phoenix FirstBIOS Embedded Pro 4.0 Release 6.1.
Plug & Play (PCI, ISA) with full legacy IO support.
PCI Auto Configuration (PCI 2.2).
Automatic DRAM (DDR) configuration.
Extended system configuration data (ESCD) memory located inside flash.
Automatic CPU detection.
Advanced Power Management 1.2.
ACPI, implementation compatible with ACPI V2.0, supported power states: S0, S2,
S3, S4 and S5.
SMBIOS.
BIOS update including ‘Crisis Recovery’.
Flash-BIOS Bootblock support for BIOS reprogramming (recovery), supported
recovery-media: Floppy, USB-Floppy, CD (bootable CD with image of the crisis-
floppy in boot section).
PIO Mode 4 and Ultra DMA Mode for IDE drives.
Support for fixed disk drives greater than 128GB (EIDE).
USB legacy support (keyboard, mouse).
USB advanced boot (floppy disk, hard disk, CD-ROM).
USB 2.0 high-speed boot.
Quick boot.
MultiBoot (FD, HDD, CD-ROM, LAN, USB mass storage, CompactFlash
®
).
System and setup password.
Quiet Boot with customizable boot logo.
WfM (Wired for Management) support.
Hardware voltage, temperature and fan speed monitoring.
Security features including tamper detection and Unique ID.

Table of Contents

Other manuals for Eurotech Apollo

Related product manuals