PhoenixBIOS features and setup
Issue G 59
Field Explanation
Floppy check
Choose Enabled if you want the system to check diskette drives
during boot. The boot process will take longer as a result.
Hard Disk Pre-
Delay
Used to introduce a delay before the BIOS first accesses the hard
disk. This ensures the hard disk has time to initialize before being
accessed by the BIOS.
You can choose Disabled if you don’t want to include a delay, or
select one of the delay times offered. These range between 3 and
30 seconds.
Extended Memory
Testing
Choose the type of tests you want to be carried out on extended
memory (i.e. memory above 1M) during boot.
You can choose Normal, Just zero it or None.
CF+ Boot
Choose Enabled if you want to provide CompactFlash
®
boot
support.
Primary LAN Boot,
Secondary LAN
Boot
Choose Enabled if you want the LAN Controller option ROM to
appear in the boot setup screen after a reboot. Network boot can
then be selected from the BIOS Boot menu.
On the APOLLO V2Ix boards, this option has been moved
to the IO Device Configuration Ethernet Configuration
screen, available from the Advanced menu
To Next Page
Loading...
