NexLog Recorder User Manual v2.2.0 139
Archive Restore complete on the <~110~> drive of
recorder <~1~>
Network Archive connected to address <~110~>,
share <~111~>
Network Archive to address: <~110~>, share:
<~111~> is NOT active. <~112~><~113~>
Network Archiving connection to address: <~110~>,
share: <~111~> is not active. Error:
<~112~><~113~>
Centralized Archiving is not connected to <~110~>.
Error: <~111~>
The recorder at <~110~> is transferring duplicate
calls. This may be because the archive pointer was
reset.
The Centralized Archive source with serial number
<~110~> is not connected
Channel <~110~> was active for more than <~111~>
seconds.
Channel <~110~> was inactive for more than <~111~>
seconds.
Communications with the UPS backup power supply
has been lost on the recorder <~1~> in facility
<~2~>. Please ensure that the UPS is properly
connected to the recorder
Power has been lost on the recorder <~1~> in the
facility <~2~>. The UPS is currently providing
power
Power has not been restored on the recorder <~1~>
in the facility <~2~> and will be shut down
shortly
The battery on UPS <~110~> has been exhausted.
Recorder <~1~> is being shut down.
The UPS on recorder <~1~> was found but is not
functioning properly
UPS is attached and functioning normally
UPS is not attached to the recorder or not working
properly