140 NexLog Recorder User Manual v2.2.0
UPS battery is not functioning properly. Please
test battery to ensure proper functionality.
The hard disk <~110~> has failed on the recorder
<~1~>. Please fix it
RAID on recorder <~1~> is degraded. Replace the
failed drive to correct the issue.
The RAID has been changed: <~110~>
The recorder <~1~> has a storage
partition(<~110~>) that is dangerously close to
being full(<~111~>). This is not a normal
condition and should be resolved immediately to
prevent possible data loss.
Primary RAID mount failed, and the recorder
recovered when secondary mount succeeded.
The recorder <~1~> had a bad file system journal
on volume group <~110~>. The problem was
automatically fixed, but this condition is not
normal and may have resulted in data loss.
The hard disk <~110~> is close to failure on
<~1~>. Please replace it as soon as possible.
The hard disk <~110~> has timed out responding to
the RAID controller on <~1~>. Please replace it as
soon as possible.
A problem occurred while sending email. Error
<~110~>: <~111~>
An unknown error code of <~110~> was received
An email has been sent to <~110~><~111~> with the
subject "<~112~>"
The alert <~110~> has been acknowledged by user
<~111~>
The user <~110~> has requested a system shutdown
The user <~110~> has been automatically logged out
Client login with username <~110~>, version
<~111~>, client string <~112~>
Client has logged out with username <~110~>
Client login has failed with username <~110~>
To Next Page
