Eventide NexLog 840 - Page 149

NexLog Recorder User Manual v2.2.0 141
8006
The system time has been changed on recorder <~1~>
by user <~110~>. The old time was <~111~>. The new
time is <~112~>
INFO
8007
Configuration change by user <~110~>: <~111~>
INFO
8008
Shutdown requested via key. Please wait.
INFO
8009
Archive Failsafe Mode Canceled by user <~110~>.
INFO
8010
One or more PC Workstations configured for
monitoring are not responding to network requests.
<~110~>
WARNING
9000
The board of type <~110~> has failed on recorder
<~1~>. The failed board is board number <~111~>.
It has failed <~112~> times
SEVERE
9001
A recording board has been removed or is missing
from the system
SEVERE
9002
Failed to open the board of type <~110~> in
position <~111~>. Error: <~112~>
SEVERE
9003
Failed to configure the board of type <~110~> in
position <~111~>. Error <~112~>
SEVERE
9004
DSP sync Error on the board of type <~110~> in
position <~111~>. Sync error count is <~112~>.
Over run count is <~113~>
WARNING
9005
Failed to configure port <~112~> on the board of
type <~110~> in position <~111~>. Error <~113~>
SEVERE
9006
Signal lost on port <~112~> on the board of type
<~110~> in position <~111~>
ERROR
9007
Frames lost on port <~112~> on the board of type
<~110~> in position <~111~>
ERROR
9008
AIS alarm on port <~112~> on the board of type
<~110~> in position <~111~>
WARNING
9009
Yellow alarm on port <~112~> on the board of type
<~110~> in position <~111~>
WARNING
9010
LOSMF alarm on port <~112~> on the board of type
<~110~> in position <~111~>
WARNING
9011
LOCRC4MF alarm on port <~112~> on the board of
type <~110~> in position <~111~>
WARNING
9012
TS16RAI alarm on port <~112~> on the board of type
<~110~> in position <~111~>
WARNING