Space User Guide Algorithms
21
Delay – [FEEDBACK]: amount of delay feedback around reverse reverb (delay amount is
DECAY amount)
Low – [LOW-LVL]: shelving boost/cut of low frequencies
High – [HI-LVL]: shelving boost/cut of high frequencies
Contour – [CONTOUR]: increase the span between low and high crossover frequencies for the
[LOW-LVL] and [HI-LVL]. This will affect the sound as long as [LOW-LVL] and [HI-LVL] are not
both set to 0.
FXMIX – [MOD-LVL]: MicroPitch detuning modulation at the input
Ynob – [DIFFUSSION]: diffusion in the reverse build-up: set to zero for a mechanical stutter
Xnob – [LATE DRY]: adjusts amount of dry signal that occurs directly after the reverse build up
ModEchoVerb
ModEchoVerb is based on a popular reverb structure from the Eventide H8000 that brought
about such presets as "Echo Space of God" and "Glorious Flange Canyon." It feeds the output
of an infinite reverb into an infinite feedback delay and slathers on an extra helping of
modulation. The modulation choices are H3000-type swept verb, flanging, or chorusing.
ModEchoVerb is incredibly versatile and can be used as a standalone reverb, delay,
chorus/flanger, or any combination of the three. [INF] and [FREEZE] are available on the
[DECAY] knob. During [FREEZE] the signal is rerouted to allow for parallel modulation/delay
over the frozen section. Have fun.
Mix – [MIX]: wet/dry mixer, 100% is all wet signal
Decay – [DECAY]: decay in seconds or note based in tempo mode. All the way right [INF]
gives an infinite reverb/sustain. All the way left, [OFF], results in only decay or modulation.
Size – [SIZE]: from normal Hall type room sizes to huge canyon sounds with echoes
Delay – [ECHO]: post reverb delay time in milliseconds or note-based in tempo mode
Low – [LOW-LVL]: post reverb shelving boost/cut of low frequencies with cut-off at 350 Hz
High – [HI-LVL]: post reverb shelving boost/cut of high frequencies with cutoff at 2000 Hz
Contour – [ECHTONE]: Tone control in the feedback loop of the echoes, left gets darker, right
gets brighter
FXMIX – [SWPTVERB], [FLANGEMIX], or [CHORSMIX]: select modulation type (swept reverb,
flanging, chorus) and modulation depth
Ynob – [MODRATE]: the modulation rate, arbitrary 0-100
Xnob – [ECHO-FBK]: feedback amount around the post reverb echo
BlackHole
Larger than the Hall or Room, BlackHole is an Eventide H8000 classic capable of cathedral-
type spaces to out-of-this-world soundscapes. This Space edition of BlackHole has two decay
modes (forward and inverse) and feedback around the entire reverb structure that extends
the Blackhole sound from huge to infinite. The standard [SIZE] and [GRAVITY] sounds are
epic, but try [PDLY] and [FEEDBACK] to take the Algorithm to the next level. Try not to get
sucked in. [INF] and [FREEZE] are both available on the [FEEDBACK] knob.
Mix – [MIX]: wet/dry mixer, 100% is all wet signal
Decay – [INV-GRAV]: inverse decay mode of a really big reverb.
[GRAVITY]: regular decay mode of a really big reverb
Size – [SIZE]: size of the reverb
Delay – [PDLY]: pre-delay time in milliseconds or note-based in tempo mode
Low – [LOW-LVL]: post reverb shelving boost/cut of low frequencies with cut-off at 350 Hz
High – [HI-LVL]: post reverb shelving boost/cut of high frequencies with cutoff at 2000 Hz
To Next Page
Loading...
