Space User Guide Connections
10
Typical Setups
Here are some suggested ways of connecting to your rig and suggested I/O level switch
setting
Guitar > > Amp - Mono In/Mono Out
This is the simplest way to connect . Connect your guitar cable to Input 1 and a
cable from Output 1 to your amp. Input and Output Level switches (In Lvl & Out Lvl)
should be set to GUITAR and AMP.
If you are using other stompboxes or pedals, it’s best to connect them in front of .
Connect ’s Input 1 to the output of the last pedal. If ’s peak LED lights solidly, set
’s In Lvl to LINE.
To Next Page
Loading...
