Eventide Space - [GLOBAL] - Global Settings; [UTILITY]

To Next Page

To Previous Page

User Guide System Mode

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to the top level System menu.

[MIDICLK OUT] – MIDI Output Clock Enable (ON, OFF)

Press the Encoder to select. Turn Encoder to set MIDI Clock Transmit ON or OFF. If ON,

can be used as a MIDI Clock source.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to the top level System menu.

[CLK FILTER] – MIDI Clock Filter Enable (ON, OFF)

Press the Encoder to select. Turn Encoder to set MIDI Clock Filtering ON or OFF. If ON,

can be used with an unstable MIDI Clock source, but will be slower and less precise at

tracking clock speed changes.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to the top level System menu.

[GLOBAL] – Global Settings

After entering System mode, turn the Encoder to select [GLOABAL], then press the Encoder to

enter the Global function settings mode. Turn the Encoder to scroll through the following

Global functions. Press the Encoder to select and set:

[MIX] – Enable Global MIX (ON, OFF)

Press the Encoder to select. Turn Encoder to set Global MIX.

Mix is always stored with Presets, but the stored value is not used if Global Mix is ON. With

Global ON, the current Wet/Dry Mix is used for all Presets.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to the top level System menu.

[TEMPO] – Enable Global Tempo (ON, OFF)

Press the Encoder to select. Turn Encoder to set Global Tempo.

Tempo is always stored with Presets, but the stored value is not used if Global Tempo is ON.

With Global ON, the current Global Tempo is used for all Presets.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to the top level System menu.

[UTILITY] - Utility Functions

After entering System mode, turn the Encoder to select [UTILITY], then press the Encoder to

enter the Utility functions settings mode. Turn the Encoder to scroll through the following

Utility functions. Press the Encoder to select and set:

Eventide Space - [GLOBAL] - Global Settings; [UTILITY] - Utility Functions