Space User Guide Algorithms
22
Contour – [RESONANCE]: the resonance of the two shelving filters, arbitrary 0-100 values.
This will affect the sound as long as [LOW-LVL] and [HI-LVL] are not both set to 0
FXMIX – [FEEDBACK]: feedback around the entire reverb structure for even larger sounds
Ynob – [MODRATE]: the modulation rate, arbitrary 0-100
Xnob – [MOD-DPTH]: the modulation depth, arbitrary 0-100
MangledVerb
While Space produces many beautiful sounds, we recognize the universe is a chaotic and
often violent place, so in the spirit of the yin and yang, we included MangledVerb from the
Eventide Eclipse. Technically, MangledVerb feeds a non-standard stereo reverb into
distortion, but sonically it can range from the light friction of a bow scraping a cello string to
the mayhem of a caged beast being poked with a red hot flounder. Judicious use of the Xnob
and Ynob is approved, and try small [SIZE] and short [DECAY] for some surprising sounds.
Mix – [MIX]: wet/dry mixer, 100% is all wet signal
Decay – [DECAY]: arbitrary 1-100 decay (less decay will also take away reverb attack)
Size – [SIZE]: size of the reverb (try <15 for some great distortion sounds)
Delay – [PDLY]: pre-delay time in milliseconds or note-based in tempo mode
Low – [LOW-LVL]: pre-distortion boost/cut of low frequencies
High – [HI-LVL]: pre-distortion boost/cut of high frequencies
Contour – [MID-LVL]: pre-distortion boost/cut of mid frequencies
FXMIX – [WOBBLE]: a modulation rate that does some spooky detuning
Ynob – [OUTPUT]: the output level of the distortion
Xnob – [SOFTCLIP], [OVRDRIVE]: the input level to one of two different types of distortions
TremoloVerb
TremoloVerb is a celestially large reverb cut back down to Earth size by an aggressive tremolo.
Use the Sine, Triangle, Peak, Ramp, or Square waves to create a rhythmic ambience; Random
and Sample/Hold to create a convulsing cloud; Envelope or ADSR to control the reverb with
your playing; or the Expression Pedal to control it with your foot. [INF] and [FREEZE] available
on the [DECAY] knob.
Mix – [MIX]: wet/dry mixer, 100% is all wet signal
Decay – [DECAY]: decay in seconds or note-based in Tempo Mode
Size – [SIZE]: room size of reverb
Delay – [PDLY]: pre-delay time in milliseconds or note-based in tempo mode
Low – [LOW-LVL]: post reverb shelving boost/cut of low frequencies with cut-off at 350 Hz
High – [HI-LVL]: post reverb shelving boost/cut of high frequencies with cutoff at [HIFREQ]
Contour – [HIFREQ]: the high corner frequency of [HILVL]. This affects the sound as long as
[HI-LVL] is not set to 0
FXMIX – [MONO DPTH / ST DPTH]: tremolo depth, in stereo mode you have the option to
have mono depth (same on both channels) or stereo depth (tremolo is 90 degrees out of
phase)
Ynob – [SPEED]: tremolo speed in Hz, sensitivity, or note-based in tempo mode
Xnob – [SHP]: tremolo shape: [SINE], [TRIANGL], [PEAK], [RANDOM], [RAMP], [SQUARE],
[SMP/HLD] (sample/hold), [ENVELOP], [ADSR], or [EXP PDL] (Expression Pedal)
DynaVerb
DynaVerb couples an Eventide Eclipse reverb with a model of the Eventide Omnipressor® to
create an adaptable dynamics reverb. The Omnipressor is capable of all types of dynamics
processing from gating, expansion, compression, limiting, and even its signature "dynamic
To Next Page
Loading...
