115
Eversense XL CGM User Guide
15
Removal Steps
Similarly to the insertion steps, your doctor will explain the simple and quick steps for the sensor removal and you will
be fully awake during the 5-minute (approximate) removal process.
Step 1: Site preparation – the sensor site will be cleaned, disinfected, then anesthetised using lidocaine.
Step 2: Incision – a small (less than 1 centimetre) incision will be made at the sensor site.
Step 3: Sensor removal – the sensor will be removed and discarded.
Step 4: Site closure – once removed, the incision will be closed with a steri-stip (sutures may be used depending
on provider’s preference).
To Next Page
Loading...
