148
Eversense XL CGM User Guide
19
Electrical and Safety Standards (continued)
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The Eversense XL CGM Mobile System is intended for use in the electromagnetic environment specified in the next
table. The customer or the user of the System should ensure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment
Guidance
RF Emissions
CISPR 11 Group 1
The Eversense XL CGM System uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
RF Emissions
CISPR 11
Class B
The Eversense XL CGM System is suitable for use in all
establishments including domestic and those directly connected to
the public low-voltage power supply network that supplies buildings
used for domestic purposes.
Recommended Separation Distances Between Other Portable/Mobile RF Communications Equipment
and the Smartphone (Receiving Device)
Follow the smartphone (or other receiving device) manufacturer’s instructions for separation distances. The
customer or the user of the smartphone (or other receiving device) can help prevent electromagnetic interference by
maintaining a minimum distance between other portable/mobile RF communications equipment (transmitters) and
the smartphone of at least 30 cm (about 12 inches). Portable/mobile RF equipment include: baby monitors, Bluetooth
wireless headsets, wireless routers, microwave ovens, laptops with internal Wi-Fi adapters, GSM cell phones, RFID
scanners and hand-held security metal detector often used by security screeners.
To Next Page
Loading...
