Eversys C2m-2021 - Switch on a Machine; Standby (Wake Up)

5.2. Switch on a machine
1. Move the steam wand (1).
2. Lift the drip tray (2) and remove the grounds drawer (3).
3. Start the machine at the main power (4), switch to «1» or «I» (ON).
4. Check that the main water inlet tap is open (5).
5. Put the grounds drawer back and push the drip tray back to its original position.
4
5
5
V1
V2
3
1
2
5.2.1. Standby (wake up)
Standby mode switches o all the functions like heating the boiler, the touch screen
and the front lighting to save energy. It is possible to use this function to switch o,
for instance overnight. Power usage is less than 2W.
If the machine is already switched on and in standby mode, press and hold (3s) the standby button
(1) to power up.
1
Operation
02.01.2023 Page 45 of 150 © Eversys S.A.