Eversys C2m-2021 - Switch off a Machine; End of the Day Guidelines; Emergency Stop

5.11. Switch o a machine
1. Move the steam wand (1).
2. Lift the drip tray (2) and remove the grounds drawer (3).
3. Empty the grounds drawer, clean and dry it.
4. Shut down the machine at the main power (4), switch to «0» (OFF).
5. On specic conditions (e.g. long term storage, actions on water pump ...), close the main water
inlet tap (5).
6. Put the grounds drawer back and push the drip tray back to its original position.
4
5
5
V1
V2
3
1
2
5.12. End of the day guidelines
To avoid odors and possibly sticky coee and milk residues (which might also block
the machine), make cleaning part of your daily end-of-the-day procedure.
This will ensure top quality coee and smooth operation.
Procedure
1. Clean according to the cleaning plan (page 69).
2. Switch o (page 55) at the main power switch.
a. Or standby (page 45) with the standby button.
b. Or set standby (page 66) programming (with super user access).
3. Have a nice evening ahead!
5.13. Emergency stop
Perform an emergency stop ONLY if the machine is completely stalled and does not
respond to any command.
To shut down all functions, either:
• Switch o (page 55) at the main power switch.
• Unplug the power cord from the mains socket.
Operation
02.01.2023 Page 55 of 150 © Eversys S.A.