Eversys C2m-2021 - Dispense a Hot Water Product; Dispense a Product with Steam

1. Adjust the coee spout height (page 50).
2. Place two cups under the coee outlet.
3. Press one of the double coee products available (e.g. 2x Espresso).
4. Wait for the product to dispense.
5.8.4. Dispense a hot water product
Depending on machine settings and outputs available, the hot water product will
be dispensed through the coee outlet and/or the hot water outlet. For more
information, contact your service organisation.
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
1. Adjust the coee spout height (page 50).
2. Place a cup under the coee outlet or the hot water outlet.
3. Press the hot water product.
4. Wait for the product to dispense.
5.8.5. Dispense a product with steam
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
Never leave the steam wand immersed in the pitcher if not used.
Operation
02.01.2023 Page 51 of 150 © Eversys S.A.