Eversys C2m-2021 - Fill the Cups Storing Surface; Make a Drink

1. Remove the cover(s) (1).
2. Fill with powder.
3. Put the lids back to their original position.
1
Left Right
5.7. Fill the cups storing surface
• Fill the cups storing surface with cups.
5.8. Make a drink
It is not possible to outline all drink products in this manual. You can nd an overview of the main
products in the following chapters.
To change settings or display of the product buttons, refer to User rights in the Display menu (page
141).
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
Operation
02.01.2023 Page 49 of 150 © Eversys S.A.