Eversys C2m-2021 - Pre-Heat Rinse; Auto Rinse; Steam Purge Button

5.3.1. Pre-heat rinse
After 10 min. idle mode (no drink is being made), a pre-heat rinse is requested by the machine if this
function is activated.
To activate or deactivate this function, please contact your local service
organisation.
5.3.2. Auto rinse
Rinsing is not a substitute for daily cleaning! Auto rinsing is necessary to remove residue build-up in
the coee and milk systems.
The coee machine automatically rinses after certain time intervals as well as when it is switched ON
or OFF.
5.4. Steam purge button
RISK OF BURNS OR SCALDING
Caution hot steam! Do not touch!
To initialise the coee machine, it is necessary to press the blinking purge button after each start-up.
Each time a purge is necessary this button will ash.
After every use of the steam wand (steam arm) it is necessary to wipe and purge it.
1. Press the blinking purge button on the main screen (1).
2. Wipe the steam wand with a damp cloth (2). Change cloths every day.
3. On the screen that displays, press purge (3).
2
1
3
Operation
02.01.2023 Page 47 of 150 © Eversys S.A.