n The cooling system has
been activated.
The printer pauses for a few
seconds and restarts once
it has returned to its normal
operating temperature.
n The printer is updating its
Firmware.
The printer restarts following
the update.
COOLING MODE FIRMWARE UPDATE
n The printer is waiting for
a card to be inserted or
removed.
Insert a card or remove the
card from the manual feeder
(see section 1 - Getting
started)
WAITING FOR A CARD
TO BE INSERTED OR REMOVED
n The printer must be
cleaned to avoid the risk
of the warranty being
voided.
See section 3 - Maintenance
CLEANING
(after 1,200 cards have been
inserted)
33
4
To Next Page
Loading...
