Evolis Zenius - Printer Status: Cover Open and Errors

n The printer cover is open.
Close the cover again. The
printer starts up.
PRINTER COVER OPEN
n Card jammed in the
printer.
n Mechanical component
fault.
Open the cover and hold
down the pushbutton in
order to eject the jammed
card. For more details, refer
to section 4-3b.
If the problem persists,
contact your Evolis dealer
for assistance.
MECHANICAL ERROR
n The printer requires
advanced cleaning.
See section 3 - Maintenance
ADVANCED CLEANING
n The printer must be cleaned.
See section 3 - Maintenance
ROUTINE CLEANING
(after 1,000 cards have been
inserted)
32
4