Evolution Digital
EVO-SUP-DMS2002HD-U-001-v1r0 Page 25
Figure 10 Activation Support Message – Cable Operator Defined Custom Message
You will notice that the text beneath “Your service needs to be activated before continuing” is the text that is fully
customizable by the Cable Operator; this is commonly referred to as the “MSO Phone Number field”. For more
information on the use of this field, please see Section 6.5.1. Please note this is just an example and used for
illustration purposes. If after 5 seconds the DTA does not detect a Site Announcement message, then it will display
the factory default message as shown in Figure 11.
To Next Page
Loading...
