EWM LP-XQ - Page 47

Functional characteristics
TIG welding
099-5TLPXQ-EW501
29.01.2021
47
Latched mode
Figure 5-36
Selection
• Select latched operating mode .
Step 1
• Press and hold torch trigger
• Shielding gas is expelled (gas pre-flows)
The arc is ignited using liftarc.
• Welding current flows with pre-selected setting.
Step 2
• Release torch trigger (no effect)
Step 3
• Press torch trigger (no effect)
Step 4
• Release torch trigger
• Arc is extinguished.
• Gas post-flow time elapses.