EWM Taurus 355 Basic TDM - Machine Control - Operating Elements

Machine description – quick overview
Machine control – Operating elements
20
099-005221-EW501
16.04.2014
4.3 Machine control – Operating elements
Figure 4-3
Item
Symbol
Description 0
1
Button, welding process
MIG/MAG welding
MMA welding
Air arc gouging
2
Display, left
Welding current, wire feed speed
3
Status displays
"Welding current display" signal light
"Wire feed speed display" signal light
4
Display, welding process
J1 MIG/MAG welding
J2 MMA welding
J3 Gouging
5
Rotary dial, welding parameters
MIG/MAG: setting dynamics/choke effect
MMA: setting MMA welding current
6
Button, select operating mode
No function.
Setting is made on the wire feed unit.