Appendix
46
Edition 04/09.2002 EXAKT 35 / 50
12.2 Declaration of conformity
EC Declaration of Conformity
In accordance with: EC Machinery Directive (89/37/EWG)
EC Low-Voltage Directive (73/23/EWG)
EMC Directive (89/336/EWG)
We hereby declare:
EXAKT-Apparatebau GmbH & Co. KG
Robert-Koch-Str. 5, 22851 Norderstedt
that the machine described below complies with the relevant fundamental safety and health
requirements of the EC directive due to its design and construction and in the version put on the
market by us.
This declaration shall be invalidated if the machine is altered without prior consultation with us.
Machine name: EXAKT Three roll mill, model 35 and model 50
Applied harmonised standards: EN 60 335-1
EN 60 204-1
EN 50082-2 (for EXAKT 50 with speed control
system)
The product complies with the requirements of the German law on machinery safety
(Gerätesicherheitsgesetz).
Signature of manufacturer:
Information concerning the undersigned: Peter Geiger Bernd Franke
Managing Director Managing Director
To Next Page
Loading...
