Exakt 35 - Speed Control System (EXAKT 50 Only)

Operation
20
Edition 04/09.2002 EXAKT 35 / 50
6.5 Speed control system (EXAKT 50 only)
The EXAKT 50 standard version is equipped with a one speed
motor
!" A special EXAKT 50 version is available with a variable
speed control system.
Note
Adjust the distribution fineness and the material throughput as
described in section 6.4.
!" Before starting, turn the speed to low
using the control knob. (Fig. 12/a)
!" Switch the unit on using the ON/OFF
switch (Fig. 12/b).
!" Increase the speed of the rollers by
turning the control knob clockwise (Fig.
12/a).
Fig. 12: Continuously variable speed control system
a
b