Operation
EXAKT 35 / 50 Edition 04/09.2002
21
6.6 General Operating Instructions
Warning – Product/Component Damage Hazard!
This section provides general operating instructions and does
not contain any safety-relevant information.
Read the entire operating manual prior to setting up and
operating the unit!
Note
Before attempting to process product EXAKT unit, first process
a small quantity of Vaseline or similar grease to become familiar
with adjusting the material flow.
1. Ensure that the unit is installed on a firmly support
benchtop.
2. Check the roller surfaces, guides and scrapers for
cleanliness prior to use.
3. Compare the main power voltage with the unit voltage
indicated on the serial/rating plate prior to connecting the
unit.
4. Prepare the product to be processed and keep a spatula
ready for feeding the product into the hopper.
5. Remove the hand-wheel for manual roller rotation.
6. Install the plastic guides.
7. Install the hopper.
8. Attach the scraper system.
9. If the unit is equipped with a speed control system adjust
the speed to low.
Continued ...
To Next Page
Loading...
