Safety
EXAKT 35 / 50 Edition 04/09.2002
7
3.3 Safety instructions for operation
Avoid any operating practice which:
!" endangers the health and safety of the user or third parties,
!" presents a danger to the unit or other property,
!" impairs the safety and operation of the unit,
!" does not comply with the safety instructions.
Servicing and maintenance should only be performed by
suitably qualified personnel who are familiar with the unit and
who have been trained in its potential hazards.
Warning – Missing safety devices or covers are a personal
injury hazard
The unit covers must be closed during system operation and
may be opened only to correct malfunctions and for
maintenance work.
Missing safety devices and covers must be refitted when work
on the unit has been completed.
Warning – Personal injury due to drawing-in hazard!
There is an increased danger of injury to persons with long hair
or personnel wearing loose clothing, ties, scarves etc.!
Loose clothing should be removed or restricted and long hair
confined behind the neck and shoulders with caps or bands
when working with the unit.
Warning – Severe pinch point at the rear gap – Personal
injury hazard!
When the product is applied to the rollers, there is an increased
risk of finger injuries.
!" Always use the hopper! Never use your hand to convey
product directly to the machine.
!" If no hopper is used, the product may only be applied using
a suitable tool (e.g. a spatula).
NOTE: There is a danger to the unit and the operator if the
tool is drawn into the gap.
To Next Page
Loading...
