Excell GTW - Chapter 3 General Function Setting

EXCELL PRECISION CO., LTD.
02018058 ZSME300000264 13
Chapter 3 General Function Setting
♦ Switch on the scale. While the scale is counting down to zero, press and hold key until
the display shows the software program version number
Release the key, the scale enters into the configuration setting mode and is
showed on the display.
Press key
Press key
Press key
Press key
Press
key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
Press key
⇒ Reserved
⇒ Reserved
⇒ Reserved
⇒ Reserved
⇒ Check-weighing configurations
⇒ RS-232 Interface output Setting
⇒ Exit setting mode
⇒ Internal value display mode
⇒ Reserved
⇒ Reserved
⇒ G Value adjustment
⇒ ID code setting
⇒ Print key function setting
⇒ Reserved
⇒ Printing orders when F5 is set as
or
⇒ Reserved