Excell GTW User Manual

EXCELL PRECISION CO., LTD.
02018058 ZSME300000264 8
Chapter 2 General Operation Description
2-1 Backlight Function
Press key to select the display backlight mode:
. ⇒ “Auto Backlight” mode. When the weight is over 10d or any key is
pressed, the display backlight will be switched on. When the weight
returns to zero (the weight on platform is less than 10d), the display
backlight will switch off after 10 seconds.
. ⇒ Display backlight is on all the time.
. ⇒ Display backlight is off.
2-2 Weighing Mode
2-2-1 Units Selection
1. After indicator is turned on, use key to select a unit from kg, lb, tael or viss, as
the screen indicated.
2. The selected unit will be memorized when you turn the indicator off. And the
memorized unit will appear after you turn on the indicator next time.
2-2-2 Check Weighing Mode
1. Preset “ High limit”, “Low limit” and “ Beeper value” operation
Use and key to preset values.
For example:
Preset “Low limit” ( Low limit >10d )
e.g. Low limit = 20 kg
Press key the display showsÑ Ò .
Press
key 1 time the display shows Ñ Ò .
Press key 2 times the display shows Ñ Ò .
Press key 4 times the display shows . Ñ Ò
Preset “High limit” ( High limit ≥ Low limit ) e.g. High limit = 25 kg
Press key 1 time the display showsÑ Ò .
Press key 1 time the display shows Ñ Ò .
Press key 2 times the display shows Ñ Ò .
Press key 1 time the display shows Ñ Ò.
Press
key 5 times the display shows Ñ Ò.
Press
key 3 times the display shows . Ñ Ò
Preset “Beeper value” ( Refer to Note ) e.g. Beeper value = 22

Excell GTW Specifications

General

Brand	Excell
Model	GTW
Category	Scales
Language	English