EXCELL PRECISION CO., LTD.
02018058 ZSME300000264
7
1-5 Keypad Functions Description
:
Press this key to power on or power off the scale
:
Press this key to select the required unit from the preset units.
:
Press this key to preset the weight and quantity.
:
Press this key to accumulate the weight value or others.
:
Press this key to tare (deduct the container weight)
:
Press this key to preset tare value.
:
Press this key to recall the totalization value, preset value and pre-tare value.
:
Press this key to clear the totalization value, preset value and pre-tare value.
:
Press this key to zero the scale.
:
Press this key to print the total data and to confirm.
:
Press this key to input the numbers (0 ~ 9) and to light up the backlight.
:
Press this key to go into counting mode
:
Press this key to sample
1-6 Power Description
Power Selection
1. 6 V / 4 Ah Rechargeable batteries
2. 110 V / 220 V ±15 % AC
Power Consumption
(Indicator + Load Cell+ no backlight) About 25 mA
(Indicator + Load Cell+ backlight) About 33 mA
(Indicator+ Load Cell+ Backlight+ wireless) About 65 mA
Low Power Alarm
Please note when the ( ) symbol keeps flashing on the left down corner of the display,
the batteries should be recharged.
The scale will turn off automatically after a few hours when the low battery warning symbol
shows up. The scale must be fully recharged, before operating again.
Please recharge at once when the symbol shows in order to keep the weight accuracy.
To Next Page
Loading...
Need help?
General
