SCPI Command Reference (FTBx-9150/FTBx-9160 Only)
100 Optical Switch
Product-Specific Commands—Description
:ROUTe[1..n]:SCAN:ADJust:AUTO?
Description This query returns the current value of the
<Optimize for repeatability> option. When this
option is selected, the switch mechanism returns
to a reference position before aligning to a new
position. This ensures optimum repeatability.
When this option is not selected, the switch
mechanism goes directly to the new channel
position. This provides faster switching times, but
less repeatability.
On *RST, the value of this setting is OFF.
Syntax :ROUTe[1..n]:SCAN:ADJust:AUTO?
Parameter(s) None
Response Syntax <AutoAdjust>
Response(s) AutoAdjust:
The response data
syntax for <AutoAdjust> is
defined as a <NR1 NUMERIC RESPONSE DATA>
element.
To Next Page
Loading...